Loading... Please wait...


Our Newsletter

24x120 Benchpro K Series ESD Workstation

  • 24x120 Benchpro K Series ESD Workstation
Calculated at checkout

Product Description

ESD Systems include 2 grounding lugs, 2 wrist strap jacks, 2 green grounding wires and Nevamar™ ESD laminate. All tops come standard with an internal system connecting all laminate sections. Quantity Discounts Available - Because BenchPro™ products are manufactured in Mexico, reduced operating costs allows BenchPro™ to add value in critical areas. To explain this, BenchPro™ products have been compared to their three largest competitors: Quality. BenchPro's exclusive "Cinch-Tite™" corner assembly system insures work bench frames will never become loose or wobbly. Leg Assembly Leg Top Frame Strength. Rather than channels or angles of steel, BenchPro™ uses square tube for structural integrity. This is especially important for the apron, as a weak apron allows legs to be bent underneath. 16 Ga. Angle 16 Ga. Channel BenchPro's 16 Ga. Tube Fasteners. BenchPro™ fasteners are heavier too. While BenchPro™ uses 5/16-18 hex bolts to assemble our legs, the competitors use only 1/4-20 bolts. Where the competitors use 1/2" long bolts to assemble legs and leg adjustment brackets, BenchPro™ uses 2" long heavier bolts. These longer bolts eliminate the possibility of cross-threading. Ease of assembly. BenchPro™ benches are the easiest to assemble too. The competitors supply an eight-page assembly manual and a big bag of assorted fasteners; BenchPro™ benches go together with only two bolts per leg. That's because BenchPro™ pre-assembles the apron that goes around the bottom of the top and the leg assemblies through WELDING, then pre-assembles the top to the apron. Tops. Weight: BenchPro™ uses heavy "industrial grade" 45-pound, 1-1/8 thick solid particle board for the core material. This is the heaviest grade in the industry. Seal: BenchPro™ seals 5 sides plus the bottom, making the top watertight, and eliminating the possibility of moisture causing warpage. Ergonomics. For your ergonomic comfort, BenchPro™ offers a 180° radius front edge on all models at no extra charge. Load capacity. While other bench makers claim weight limits of 650--1200 pounds, BenchPro's use of Cinch-Tite™ corner fastening, plus extensive welding allows us to ensure a 5,000 pound load will never damage the bench.

Find Similar Products by Category

Add to Wish List

Click the button below to add the 24x120 Benchpro K Series ESD Workstation to your wish list.

You Recently Viewed...

Our Policies

Customer Service and Site Map

Midwest Production Supply
12201 Wood Lake Drive
Burnsville, MN 55337
Toll Free: 800.918.9692