Caldry 100 3.6 Mil Metalized Moisture Barrier Bags
CALDRY 100TM
Utilizing multiple layers of aluminized polyester, CALDRY 100TM achieves the task of being a highly effective but economical solution to static free moisture barrier packaging. It meets the MVTR, EMI/RFI/Static shielding requirements of MIL-B-81705 REV. L, TY. I and EIA 583. CALDRY 100TM provides full protection from static fields and tribocharging. CALDRY 100TM also replaces the costly nylon/foil laminates with a 3.6 mil multi-layer composition. Featuring a low MVTR Moisture, it is also available to meet MIL-B-81705 REV. C, TY. I, CL.I.
Available in many sizes. Qty discounts are available. Comparable to 3M/SCC Drishield 2000.
- Light weight and puncture resistance
- Easily conforms to the shape of products during vacuum packaging.
- Good moisture barrier
- For packaging of SMD’s in trays, tape and reel, chip rails, and disk caddies.
- Static dissipative inner and outer surfaces.
- Available in class 100 clean.
- Meets the electrical and physical requirements of MIL-B-81705 REV. C, TY. I, EIA 541, and EIA 583.
- Special tracking code for traceability
- Contains no amines or amides and is N-Octanoic acid free.
- Custom 6-color printing and hot-stamping are available
|
ELECTRICAL PROPERTIES |
|||
|
EMI SHIELDING (MIL-PRF-81705-REV.D) (1 – 10 GHz)
|
> 40 db
|
||
|
RESISTIVITY – CONDUCTIVE METAL LAYER (ASTM D-257)
|
< 2 Ohm/in. 2 |
||
|
SURFACE RESISTIVITY (OUTER/INNER) (ASTM D-257)
|
< 1012 Ohm/in. 2 |
||
|
ELECTROSTATIC DECAY (FTMS 101C) (5000 to 0 V)
|
< 0.05 sec.
|
||
|
CAPACITIVE PROBE TEST(EIA 541)
|
< 8 V
|
||
|
CHARGE GENERATION (nC/in.2)
|
TEFLON:
|
-0.09
|
|
|
QUARTZ:
|
0.10
|
||
|
PHYSICAL PROPERTIES (dissipative layer/MET PET/2.6 mil LDPE/dissipative layer) |
|||
|
TOTAL THICKNESS (TAPPI 411)
|
3.6 mil
|
||
|
LIGHT TRANSMISSION (ASTM D-1003-77)
|
< 0.01%
|
||
|
TENSILE STRENGTH (D882-83, METHOD A)
|
MD: 9000 lb./in. 2 |
||
|
TD: 10500 lb./in. 2 |
|||
|
TEAR STRENGTH (D1004-66 NOTCHED)
|
MD: 4.7 lbs.
|
||
|
TD: 4.3 lbs.
|
|||
|
BURST STRENGTH (FTMS 191-C METHOD 5122)
|
84 lb./in. 2 |
||
|
PUNCTURE STRENGTH (FTMS 101-C METHOD 2065.1)
|
> 20 lbs.
|
||
|
MOISTURE VAPOR TRANSMISSION RATE (ASTM F1249)
|
< 0.02 gr./100 in 2 24 hrs. |
||
|
ELONGATION (ASTM D822-83, METHOD A)
|
MD: 98%
|
||
|
TD: 80%
|
|||
|
Caltex Plastics makes no warranty, expressed or implied, as to the suitability of these materials for
|
|||
|
any specific use. The values shown above were developed from random samples taken from production
|
|||
…